Chip Breaker: NM4. Application: Med Cut.
Chip Breaker: NM5. Application: Med Cut.

Insert Grade QX8010
(ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Chip Breaker: NSA. Application: Light Cut.
Chip Breaker: NSS. Application: Light/Medium.

Insert Grades QX5030
(ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

Chip Breaker: NM6. Application: Med Cut.

The post Yamaloy WNMG Turning Insert first appeared on Mbalula XI.

Chip Breaker: NM6. Application: Med Cut.

The post Yamaloy TNMG Turning Insert first appeared on Mbalula XI.

Insert Grade QX500
(ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.

Insert Grades QX520
(ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

Chip Breaker: PM. Application: Med Cut.

The post Yamaloy TCMT Turning Insert first appeared on Mbalula XI.

Chip Breaker: NM6. Application: Med Cut.

The post Yamaloy SNMG Turning Insert first appeared on Mbalula XI.

Chip Breaker: AL. Application: Med Cut (Alum).

The post Yamaloy SCGT Turning Insert first appeared on Mbalula XI.

Chip Breaker: PM. Application: Medium.

The post Yamaloy SCMT Turning Insert first appeared on Mbalula XI.

Chip Breaker: L11. Application: Rough.

Insert Grade QX520
(ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

Insert Grade QX530
(ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.

Chip Breaker: R11. Application: Rough.

The post Yamaloy KNUX Turning Inserts first appeared on Mbalula XI.

These DCGT 55° rhombic turning inserts are grade K10 (ISO K10) uncoated. Used in combination with a high rake geometry for machining aluminium, plastics and other soft non-ferrous materials. With an AL Chipbreaker suited for medium cuts of aluminium.

Insert Grade QX530
(ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.

Chip Breaker: PF. Application: Finish.

Chip Breaker: AL. Suited for medium cuts of aluminium

Typical Applications
• Used in combination with a high rake geometry for machining aluminum, plastics and other soft non-ferrous materials

The post Yamaloy DCGT Turning Inserts first appeared on Mbalula XI.

NM4. Application: Med Cut.

NM6. Application: Med Cut.

The post Yamaloy DNMG Turning Inserts first appeared on Mbalula XI.

PM. Application: Med Cut.

The post Yamaloy DCMT Turning Inserts first appeared on Mbalula XI.